Tag: Pla

Troubleshooting PLA Jamming in All Metal Hotend

Published on in Category 3DPriting

PLA Jamming happens in any all metal hotend, even with E3D, Prusa Nozzle, Printrbot Metal Hotend, etc,. PLA jamming in all metal hot end is common issue, but this does not happen with PEEK based JHead Hotends. Metal Hotend can print High temperatures filaments without any problem, this includes high temperature filaments like ABS, Nylon, Ninja Flex, etc., Here we try to list down the most command reason for jamming and solutions for the same.


How to dehydrate PLA Filament

Published on in Category 3DPriting

After 6 or more months, PLA Filaments become brittle and break easy. This make the filament not suitable for use. In our observation we found it happens irrespective of your region/climate or manufacture. Only the time may wary based on atmospheric parameters of the place where the filaments are stored. The main reason for brittleness of filament is due to moisture absorption. ABS, PLA, and other common filament materials are mildly hygroscopic, so they will readily absorb moisture from the air.


How To Store PLA Filament

Published on in Category 3DPriting

PLA filament is a bio-plastic, it is susceptible to moisture. As the filament starts attracting moisture, That moisture can attract dirt and dust and spool it right into your print head The filament can expand and jam the head It can become brittle and broken like glass So it is best idea keep the PLA filament as airtight as possible. Thingiverse user and 3D printing enthusiast, Stephen Hall responded to this storage challenge by creating an airtight filament deliver system which is little more than a plastic storage bin (he used the Lock & Lock Handy Rectangular 12ltr container from Amazon), some 5mm push fit connectors, and some 3D printed holders he designed for the connectors.


Which Filament is best for 3D Printer 3mm or 1.75 mm

Published on in Category 3DPriting

Before we see which filament is best for 3D Printer in this article, lets find why filament came in. In early times the inventors (RepRap community and others) used the filament of different size, some even used direct extruded materials to be feed to the 3d printers, but they were not portable, soon every one started and settled with the wire like filament, which can be easily rolled in a coil spool, transported, portable etc.