Tag: Arduino

[Solved] Arduino not getting detected USB2.0-Serial issue

Published on in Category Electronics

There are two reasons why you Arduino Clone board is not working A fake FTDI chip is used in your device CH340G USB to serial chip is used your device instead of FTDI When fake FTDI chip used There reason is here because latest Windows driver for FTDI chip that stopped working with cloned FTDI chip, this turned all those fake FTDI chips are at risk of being bricked.


How to setup Atmel Studio for Arduino development

Published on in Series Arduino Development with Atmel Studio

After selecting Arduino Nano 3.0 for Eggy, we installed Arduino IDE and written few programs. Its very user friendly, targeted toward non-developers. But that will not suite our need. AVR Studio will can fill the gap for professional development tool. There are many pros and cons when using AVR Studio over Arduino IDE. Our needs are simple, we want the fast, feature rich IDE (that’s Atmel Studio – also called as AVR Studio).


How to integrate AVRDude with Atmel Studio

Published on in Series Arduino Development with Atmel Studio

We are able to compile the programs for Arduino using Atmel Studio 6 in this guide “How to setup Atmel Studio for Arduino development” So now move on with uploading the compile binary within Atmel Studio using AVRdude Step 1: Download and Install Arduino IDE. If you don’t have it already you can download if from arduino.cc. I have installed Arduino IDE in D:/arduino-1.0.4 Step 2: Create command-line parameter for AVRdude We have moved this step to another to separate article “Programming Arduino using AVRDude”


Programming Arduino using AVRDude

Published on in Series Arduino Development with Atmel Studio

In this article we will see how to program Arduino boards using AVRDude Create command-line parameter for AVRdude avrdude is a command-line program, we need to pass correct command-line arguments to program the Arduino. D:/arduino-1.0.4/hardwaretools/avr/bin> avrdude.exe Usage: avrdude.exe [options] Options: -p Required. Specify AVR device. -b Override RS-232 baud rate. -B Specify JTAG/STK500v2 bit clock period (us). -C Specify location of configuration file. -c Specify programmer type. -D Disable auto erase for flash memory -i ISP Clock Delay [in microseconds] -P Specify connection port.


Real Time DAQ using Arduino and Open Source Software's

Published on in Category Electronics

Need a low cost Real Time Data acquisition for your experiments, that too with free and open source hardware and softwares, then follow the steps in the articles Background: We were doing some product development/testing. There was a module which will detect the presence of the certain type of gas, and give an analog reading, this module intern was connected to Arduino which sends the data to PC using serial communication.