WoodMAXi3 Z Axis Assembly guide

Published on in Series RepRap WoodMAX i3 Build Manual


Follow this guide to assemble the Z axis

WoodMAX i3 Z Axis Assembly

WoodMAX i3 Z Axis Assembly

WoodMAX i3 Z Axis Assembly

WoodMAX i3 Z Axis Assembly

WoodMAX i3 Z Axis Assembly

WoodMAX i3 Z Axis Assembly

WoodMAX i3 Z Axis Assembly

WoodMAX i3 Z Axis Assembly

WoodMAX i3 Z Axis Assembly

Some time the threaded rod will be lengthy, so you cant lock the shaft with lock plates. In that case either you can cut the threaded rod to correct length or make a small hole using drill so the threaded rod can pass through the lock plate. Use M4x25 bolts



This article is part of RepRap WoodMAX i3 Build Manual series.

  1. WoodMAX i3 3D Printer Specification
  2. Bill of Materials for WoodMAXi3 3D Printer
  3. WoodMAXi3 Main Frame assembly guide
  4. WoodMAXi3 Z Axis Assembly guide [This Article]
  5. WoodMAXi3 Print Bed Assembly Guide
  6. WoodMAXi3 X axis assembly guide
  7. WoodMAXi3 Electronics Assembly guide
  8. Installing Marlin firmware in WoodMAXi3
  9. Configuring Repetier Host for WoodMAXi3
  10. Powering Up WoodMAXi3 3D Printer
  11. Thing to do Before 3D Printing
  12. WoodMAX FAQ
  13. WoodMAXi3 / Prusai3 Troubleshooting Guide
  14. Configuring Matter Control for WoodMAX i3 /Prusa i3
  15. Configuring Marlin for WoodMAX i3
  16. Sample Slic3r Configuration for WoodMAX i3

TAGS: woodmaxi3

Share on: Email Facebook Twitter


View/Write Comments