WoodMAX i3 3D Printer Specification

Published on in Series RepRap WoodMAX i3 Build Manual


An open source 3D Printer based on RepRap Prusa i3

Specification

  • RepRap Prusa i3 Based Design
  • Building Volume : 200 x 200 x 180 mm
  • No. Of Extruder’s: 1
  • Layer thickness : 0.1 – 0.3 mm (This is optimal, but you can go even below that)
  • XY Positioning Precision : 0.0125 mm
  • Nozzle diameter : 0.3 mm (Can change to 0.4, 0.6, 0.8)
  • Filament Diameter: 1.75
  • Power Supply : Input 230V / Output 12v DC 300W
  • Electronics : RAMPS 1.4 + Mega + StepSick
  • Hotend: JHead Next Hotend, 230C Temperature MAX
  • Heatbed: Mk2b Heatbed, 110C MAX Temperature * (See Additional notes)
  • Printable Materials : PLA and ABS + (Anything that can be extruded up to 220C)
  • Easy to assemble (than original Prusa i3)
  • Build Material: High quality laser cut 6mm branded plywood parts
  • Step Motor: NEMA 17, 1.8 step angle (45 Ncm x 3 and 28 Ncm x 2)
  • Connectivity: USB
  • Kit Weight: 8 Kg
  • Documentation: Detailed assembly manual (on-line guides only - scroll down more to see the links)
  • Software: Repetier Host and Marlin

Notes:

  • Heatbed can reach up to 110C, this need power supply upgrade to 12V, 500W. With 240 watt it will reach 60C as max.
  • You can use any combination of software, but in this documentation we will only explain Repetier Host and Marlin

Warning and Safety Notice

  • Never operate your 3d printer unattended - The electronics board is designed to handle power levels capable of causing a fire
  • Make sure all connected parts subject to heating (including the wires and connectors!) are far away from any potentially combustible material
  • Be very careful with the initial board checkout, ideally using a power supply protected from short circuit and overload
  • Always use the proper fuses
  • Ensure your smoke detector is working properly
  • High voltage circuit, may cause Electric shock
  • Children’s and kids should use the 3d printer only with adult supervision

Designs



This article is part of RepRap WoodMAX i3 Build Manual series.

  1. WoodMAX i3 3D Printer Specification [This Article]
  2. Bill of Materials for WoodMAXi3 3D Printer
  3. WoodMAXi3 Main Frame assembly guide
  4. WoodMAXi3 Z Axis Assembly guide
  5. WoodMAXi3 Print Bed Assembly Guide
  6. WoodMAXi3 X axis assembly guide
  7. WoodMAXi3 Electronics Assembly guide
  8. Installing Marlin firmware in WoodMAXi3
  9. Configuring Repetier Host for WoodMAXi3
  10. Powering Up WoodMAXi3 3D Printer
  11. Thing to do Before 3D Printing
  12. WoodMAX FAQ
  13. WoodMAXi3 / Prusai3 Troubleshooting Guide
  14. Configuring Matter Control for WoodMAX i3 /Prusa i3
  15. Configuring Marlin for WoodMAX i3
  16. Sample Slic3r Configuration for WoodMAX i3

TAGS: woodmaxi3 specification

Share on: Email Facebook Twitter


View/Write Comments