Category: Design

aSensar Extruder v3

Published on May 01, 2015 in Category Design

aSensar Extruder v3 Designed for easy to assembly and use Features Compact and Convertible to any 3D Printer Compatible with JHead, E3D, RRI Hoted Made of Aluminium, Excellent heat dissipation and durable Perfect fits on NEMA 17 Stepper Motor Use filament of your choice upto 3mm dia Easy to assemble and use Desing and Drawings aSensar Direct Drive Extruder V3 Arm aSensar Direct Drive Extruder V3 Block Flexible Mounting Convertible You can use it as Direct drive Extruder or Bowden Tube Extruder

Jhead Improved Hotend

Published on January 15, 2015 in Category Design

This is a imporved version of proven Open Source Hotend JHead Features 100% Compatible with Jhead Hotends Select nozzles of your choice 0.3, 0.4, 0.6, 0.8 or make your own Improved thermistor mounting, for easy and error free Works with Direct drive and Bowden Extruders Redesigned with for easy manufacturing in mind for economical production Default: 1.75mm filaments, Use 3mm filaments with minimum modification Works perfectly with PLA and ABS, PLA:180-190C, ABS:200-220C, MAX:230 C Dimension and Specification Jhead Hotend Nozzle

aSensar Extruder v2

Published on August 01, 2014 in Category Design

aSensar Extruder v2 designed for affordablity and performance Features Compatible with RepRap Prusa i3 based 3D Printer Compatible with JHead, E3D, RRI Hoted Made of Aluminum, Excellent heat dissipation Perfect fits on NEMA 17 Stepper Motor Use filament 1.75mm/3mm Desing and Drawings aSensar Direct Drive Extruder V2 - Arm aSensar Direct Drive Extruder V2 - Body

aSensar Extruder v1

Published on March 01, 2014 in Category Design

aSensar Extruder v1 designed for affordablity and performance Features Desinged for RepRap WoodMAXi3 3D Printer Compatible with JHead, E3D, RRI Hoted Made of Aluminum, Excellent heat dissipation Perfect fit for NEMA 17 Stepper Motor](/p> Use filament 1.75mm/3mm Desing and Drawings aSensar Direct Drive Extruder V1 Assembled aSensar Direct Drive Extruder V1 Arm aSensar Direct Drive Extruder V1 Block

RRI Hotend for 3D Printers

Published on August 10, 2013 in Category Design

An atempt to design low cost, made in India hotend that works with ideas derived several open source desings RRI hotend is oneof the successful hotend desing from aSensar, the project is release as open source hardware. The hotend is made of PEEK and PTFE as isolator, brass material for nozzle and barrel. Features Desinged to be compatible with extruders desinged for JHead and E3d Hotends Select nozzles of your choice 0.

Extruder desing exprimentation

Published on July 04, 2013 in Category Design

It’s an attempt to desgin easy to asssemble affordable universal extruder for RepRap 3D Printers. After some evaluation of iteration 1 of the extruder, we have done some changes to make it use very few components, that are easy to make and assemble. aSensar Extruder – assembled Design of Arm In v3, the arm was designed, The function of the arm is to act as a filament guide press filament against the gear.

Hotend desing exprimentation

Published on June 10, 2013 in Category Design

Inspired by the J Hotend design and reliable usage by the community, aSensar’s hotend derives design ideas from J hotend. Here is the rendering of aSensar hotend. we have eliminated the PTFE lining, used in the J hotend. Just received the aSensar Hotend from the fab, it came very well as we expected Machined parts of aSensar Hotend + Hex key + Ceramic heater cartridge Fully assembled aSensar Hotend Rendering for your comparison